Get Your Honda Radio or Navigation Unlock Code: Visit https://radio-navicode.honda.com/

If your Honda’s radio or navigation system is locked after a battery disconnect, you’ll need an unlock code. Fortunately, you can retrieve this code online without needing a trip to the dealership. Visit https://radio-navicode.honda.com/ to unlock your system quickly and easily. This article guides you through the process of finding the necessary information and obtaining your code.

Locating Your Honda VIN

Before you visit https://radio-navicode.honda.com/, you’ll need your Vehicle Identification Number (VIN). This 17-digit code acts as your car’s unique identifier. You can find your VIN in several locations:

• Driver’s Side Windshield: Look at the base of the windshield on the driver’s side.
• Vehicle Registration: Your VIN is printed on your vehicle registration document.
• Insurance Documents: Check your insurance statement or proof-of-insurance card.
• Honda Financial Statements: Your VIN will be on any financial statements from Honda.
• Honda Correspondence: Look for your VIN on surveys or other official mail from American Honda.

Important Note: VINs use numbers 0-9 and letters A-Z, excluding I, O, and Q. Ensure you haven’t mistaken a zero (0) for the letter O. Double-check for accidentally inverted numbers or letters if you encounter issues.

Finding Your Device Serial Number

You’ll also need the serial number of your radio or navigation device.

• 2013-2014 Odyssey/Pilot: These models don’t require unlock codes. Consult your owner’s manual for system initiation instructions.
• Pre-2001 Models: The serial number is on the back of the device. Schedule a service appointment with your Honda dealer for assistance.

For other models, check these locations:

• Anti-Theft ID Card: Look for this card in your glove box. It often contains the serial number.
• Glove Box Sticker: Some dealers place a sticker with the serial number inside the glove box.

Obtaining the Serial Number from the Display (2001 and Later)

For models from 2001 onwards, you can usually retrieve the serial number directly from the device display.

General Instructions for Most Models

1. Turn the ignition to the ON position.
2. Power on the radio or navigation system. If the display shows “COdE,” proceed to the next step. If not, remove the backup fuse for one minute and repeat step 1.
3. Turn the device OFF.
4. Simultaneously press and hold the radio preset buttons 1 and 6, then turn the device ON.
5. The display will alternate between two screens: one starting with “U” followed by four digits (e.g., U2200), and another starting with “L” followed by four digits (e.g., L0055).
6. Record all eight digits, ignoring the “U” and “L.”

Instructions for 2003-2007 Accord with Navigation

1. Turn the ignition to the ACC (I) position.
2. Turn on the audio unit. Ensure the display shows “COdE.” If not, remove the backup fuse for one minute and repeat step 1.
3. Turn off the audio unit.
4. Press and hold the upper halves of the SEEK/SKIP and CH/DISC buttons, then press and release the PWR/VOL knob. The display will alternate between two screens showing the serial number in two parts.
5. Record all eight digits of the serial number.

Retrieving Your Code: Visit https://radio-navicode.honda.com/

Once you have your VIN and serial number, visit https://radio-navicode.honda.com/ to get your unlock code. The website operates Monday-Friday 6 AM to 11 PM CDT, Saturdays 6 AM to 8:30 PM CDT, and Sundays 6 AM to 11 PM CDT. Enter your information in the “Get Codes” section. You’ll need your phone number, zip code, and a valid email address to receive your confirmation and unlock code.