Programming a new key fob for your 2017 Chevy Malibu might seem daunting, but it’s a manageable process. This guide outlines the steps for programming a key fob, specifically highlighting the role of the Transmitter Pocket 2017 Chevy Malibu. Understanding this crucial component ensures successful key fob programming.
Programming with Existing Keys (Keyless Access Only)
If you have two working key fobs, programming a new one is relatively straightforward. Ensure your car is off and gather all key fobs, both old and new.
-
Place Recognized Keys: Position the two working keys inside the front cup holders.
-
Prepare the New Key: Remove the key lock cylinder cap from the driver’s side door handle. Insert the new key fob’s metal key into the lock cylinder and turn it to the unlock position five times within a 10-second window. Your Driver Information Center (DIC) should display “READY FOR REMOTE #2,” “READY FOR REMOTE #3,” or a similar message.
-
Utilize the Transmitter Pocket: Locate the transmitter pocket 2017 Chevy Malibu inside the center console storage area. Place the new key fob inside this pocket with the buttons facing the rear of the vehicle. This specific orientation is crucial for proper programming.
-
Start the Engine: Press the ENGINE START/STOP button. The DIC will confirm successful programming and indicate readiness for additional fobs.
-
Verify Functionality: Remove a recognized key from the cup holder and test the UNLOCK or LOCK buttons. Repeat steps 3-5 for any remaining new key fobs. Once finished, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
-
Reassemble Key Fob: Insert the metal key back into the new key fob.
Programming Without Existing Keys (Keyless Access Only, Not Available in Canada)
If you lack two working key fobs, the process is more involved, requiring approximately 30 minutes. Again, ensure your car is off and have all key fobs you wish to program readily available.
-
Initiate Learning Mode: Remove the key lock cylinder cap from the driver’s side door handle. Insert a key fob’s metal key into the lock cylinder and turn it to the unlock position five times within 10 seconds. The DIC will display “REMOTE LEARN PENDING, PLEASE WAIT.”
-
Waiting Period: Wait 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN.” Then, press ENGINE START/STOP. The DIC will revert to “REMOTE LEARN PENDING, PLEASE WAIT.” Repeat this step two more times. This process disables any previously programmed keys.
-
Program First Key: The DIC should now display “READY FOR REMOTE #1.” Place the first key fob in the transmitter pocket 2017 Chevy Malibu, buttons facing rearward.
-
Program Subsequent Keys: Press ENGINE START/STOP. The DIC will confirm successful programming and indicate readiness for the next fob. Remove the programmed fob, test the UNLOCK or LOCK buttons, and repeat steps 3-4 for each remaining key fob. Once all fobs are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
-
Reassemble Key Fob: Insert the metal key back into each key fob.
This comprehensive guide helps you program your 2017 Chevy Malibu key fob. Remember to pay close attention to the use of the transmitter pocket 2017 Chevy Malibu as it is vital to the process. By following these steps carefully, you can successfully program your key fobs and regain access to your vehicle.
