Tired of that pesky check engine light? If you’re driving a Volkswagen, Audi, Seat, or Skoda with a Common Rail TDI diesel engine, a P2015 fault code likely means a costly intake manifold replacement – often exceeding $800 in parts and labor. But there’s a better solution: Tdi Repair with a simple, affordable bracket.
This TDI repair bracket restricts the intake flap motor (V157) to its original range of motion, preventing the over-extension that triggers the P2015 error. Installing this bracket is a quick 15-minute job, saving you significant money and potential damage to your fuel system. It’s also a preventative measure against future issues, eliminating wear and tear that leads to the dreaded “terror” code.
Proper installation of the TDI repair bracket requires temporary removal of the intake flap motor.
This TDI repair kit may also resolve other TDI error codes, including P2004, P2006, and P2016. The bracket is designed for the aluminum intake manifold (03L 129 711E) found on most 2.0 liter four-cylinder Common Rail TDI engines from 2009-2014 in North America and other regions.
Key Features of this TDI Repair Solution:
- Cost-Effective: Save hundreds compared to intake manifold replacement.
- Easy Installation: Install in just 15 minutes with a T30 Torx screwdriver or socket.
- Preventative Maintenance: Prevents future wear and tear on the intake flap mechanism.
- Potential for Multiple Code Fixes: May clear P2004, P2006, and P2016 codes in addition to P2015.
The TDI repair bracket is compatible with the aluminum intake manifold (03L 129 711E).
Compatibility:
- North America: 2009-2014 Golf, Jetta, Jetta Sportwagen, Beetle, and Audi A3 with Common Rail TDI. (Excludes Passat NMS)
- Other Regions: 2008-2014 Volkswagen (Golf, Eos, Beetle, Jetta, Passat, CC, Scirocco, Amarok, Touran, Transporter, Tiguan), Audi (A3, A4, A4 Allroad, A5, A6, Q3, Q5, TT), Seat (Alhambra, Altea, Exeo, Leon, Ibiza, Toledo), Skoda (Octavia, Superb, Yeti) with 2.0 liter, 4-cylinder Common Rail TDI.
This TDI repair solution provides a reliable fix for the P2015 fault code and offers peace of mind for TDI owners. The included technical support and video tutorials ensure a successful installation. If the code doesn’t clear immediately, a simple “jump start” of the motor arm may be necessary. This involves pulling the motor arm forward with the engine running, allowing the system to recalibrate and clear the code, typically within a few days.
This bracket addresses the following fault code:
- DTC 2968, 18447 or 008213 – Intake Manifold Flap Position Sensor (Bank 1) P2015 – 000 – Implausible Signal – MIL ON
Note: This bracket is specifically designed for Common Rail TDI diesel engines and will not work with gasoline engines or V6 TDI engines. A separate bracket is available for the black plastic manifold (03L 129 711AG) found in some markets outside North America.
