If your Honda’s battery died or was disconnected, you’ll likely need your radio or navigation code to unlock it. Don’t worry about a trip to the dealership! You can often find your Honda navi code gratis online. This guide will show you how to locate your vehicle information and retrieve your unlock code.
Locating Your Honda VIN
The first piece of information you’ll need is your Honda’s Vehicle Identification Number (VIN). This 17-digit code acts like your car’s fingerprint. You can find your VIN in several places:
- Windshield Base: Look on the driver’s side at the base of the windshield.
- Vehicle Registration: Your VIN is printed on your vehicle registration document.
- Insurance Documents: Check your insurance statement or proof-of-insurance card.
- Honda Financial Statements: Your VIN will be on any financial statements from Honda.
- Honda Correspondence: Look for your VIN on any surveys or official communications from American Honda.
Important Note: VINs use letters A-Z and numbers 0-9, excluding I, O, and Q. Double-check for accuracy, especially ensuring you haven’t mistaken the number zero (0) for the letter O.
Finding Your Device Serial Number
Next, you’ll need the serial number of your radio or navigation unit.
- 2013-2014 Odyssey or Pilot: These models don’t require a code. Consult your owner’s manual for system initiation instructions.
- Pre-2001 Models: The serial number is on the back of the device. You’ll need to contact a Honda dealer for assistance.
- 2001 and Later Models: For most models, you can find the serial number on a label in the glove box or by accessing it through the device display.
Retrieving the Serial Number from the Display (Most Models)
If your Honda is from 2001 or later, follow these steps:
- Ignition ON: Turn the ignition switch to the ON position.
- Device ON: Turn on the radio or navigation system. If it displays “CODE,” proceed to the next step. If not, remove the backup fuse for one minute and repeat steps 1 and 2.
- Device OFF: Turn the device off.
- Button Combination: Press and hold the radio preset buttons 1 and 6 simultaneously while turning the device back on.
- Serial Number Display: The display will alternate between two screens. One will show “U” followed by the first four digits of the serial number (e.g., U2200). The other will show “L” followed by the last four digits (e.g., L0055).
- Record Serial Number: Combine the digits to get your 8-digit serial number (e.g., 22000055).
Serial Number for 2003-2007 Accord with Navigation
For these models, the process is slightly different:
- Ignition ACC: Turn the ignition switch to the ACC (I) position.
- Check for “CODE”: Ensure the audio unit displays “CODE.” If not, pull the backup fuse for a minute and repeat steps 1 and 2.
- Unit Off: Turn the audio unit off.
- Button and Knob Combination: Press and hold the top halves of the SEEK/SKIP and CH/DISC buttons while pressing and releasing the PWR/VOL knob.
- Serial Number Display: The display will alternate, showing “U” and the first four digits, then “L” and the last four digits.
- Record: Combine the digits to obtain the complete serial number.
Getting Your Free Honda Navi Code
Once you have your VIN and serial number, visit the official Honda website (https://radio-navicode.honda.com/) to retrieve your unlock code. Enter your information in the “Get Codes” section. The website operates during specific hours. You’ll need your phone number, zip code, and a valid email address to receive your confirmation. Unlock your Honda radio or navigation system and enjoy your drive!
