Programming a key fob for your Mitsubishi Outlander can seem daunting, but it’s actually a straightforward process. This guide provides step-by-step instructions for programming a 2004 Mitsubishi Outlander key fob remote. Follow these instructions carefully, and you’ll have your new key fob working in minutes.
Locating the Data Port and Initial Setup
The first step is to locate the data port under the driver’s side dashboard. It’s typically positioned to the right of the steering column. This port, also known as the OBD-II port, is where you’ll connect a jumper wire.
Next, insert your keys into the ignition and leave them in the OFF position. Crucially, ensure there are metal contact pins in terminals 1 and 4 of the data port. Using a suitable jumper wire, connect these two terminals. This wire must remain connected throughout the entire programming procedure. Double-check you’ve correctly identified terminals 1 and 4 before proceeding.
Entering Programming Mode and Registering the Remote
With the jumper wire securely connected, quickly press the hazard switch six times within 10 seconds. You’ll know you’ve successfully entered programming mode when the doors automatically lock and unlock once. This action signals that the system is ready to receive the new key fob’s signal.
Now, press the LOCK button on the remote you want to program three times within 10 seconds. If the programming is successful, the doors will lock and unlock once again to confirm. This indicates the key fob has been successfully registered to your vehicle.
Programming Additional Remotes and Completion
You can program up to four remotes total, including any existing ones, within one minute of entering programming mode. Repeat the previous step (pressing the LOCK button three times) for each additional remote. Each successful programming will be confirmed by the doors locking and unlocking.
Once you’ve programmed all your desired remotes, disconnect the jumper wire from the data port and remove the keys from the ignition. Your newly programmed key fobs are now ready to use.
Finding Professional Assistance
If you encounter difficulties programming the remote yourself or prefer professional assistance, consider seeking help from a qualified technician. A locksmith or car dealership can typically program key fobs for a fee. Searching online for “Mitsubishi key fob programming near me” can help you locate a qualified professional in your area.
