The Autel MaxiIM KM100 key programmer offers impressive immo programming capabilities, especially when paired with the PLC200 interface. This guide outlines the process for programming a new key for a 2019-2022 Toyota Corolla when all keys are lost (Km100 All Keys Lost).
Preparation:
Before beginning, obtain the 12-digit rolling code for the vehicle. This code can be acquired from a third-party provider like NASTF. This is crucial for the km100 all keys lost procedure.
Procedure:
-
Initial Connection: Connect the PLC200 dongle to the vehicle’s OBD port. Then, pair the PLC200 with the Autel KM100 via Bluetooth. Turn the ignition to the unlocked position and verify the passenger door lock actuates.
-
Remote Desktop (Optional): For remote operation, establish a remote desktop connection to the KM100 tablet using software like TeamViewer.
-
Vehicle Identification: In the KM100, navigate to the IMMO function and select Toyota. The device will automatically scan and decode the VIN, confirming the vehicle information.
-
Immobilizer Reset: After confirming the vehicle information, perform an Immo Status Scan. Even if no DTCs are present, proceed with the Immobilizer Reset function specifically designed for all keys lost scenarios. This is located within Immo Learning -> Immobilizer -> Immobilizer Reset (all keys lost).
-
Rolling Code Input: The KM100 will prompt for the 12-digit rolling code. Enter the code obtained earlier.
-
Immobilizer Reset Process: The KM100 will initiate the immobilizer reset process, which typically takes around 16 minutes. Follow the on-screen instructions, including turning the ignition off and on as prompted.
-
Key Programming: After the reset is complete, proceed to the Add Key function. Follow the prompts to program the new key, including turning the ignition on with a working key (if available) and performing the required key cycles.
-
Remote Programming: Finally, program the remote functions of the new key by following the on-screen instructions, which usually involves pressing specific button combinations.
Conclusion: The Autel KM100, coupled with the PLC200, provides a comprehensive solution for km100 all keys lost situations on 2019-2022 Toyota Corollas. Its intuitive interface and guided procedures simplify the complex process of key and remote programming. This device offers a cost-effective alternative to other more complex programming systems. Remember that obtaining the correct rolling code is critical for a successful key programming procedure.
