If your Honda’s battery died or was disconnected, you’ll likely need your radio or navigation unlock code. Fortunately, retrieving this code is straightforward thanks to https://radio-navicode.honda.com. This article provides a comprehensive guide on how to obtain your unlock code through the official Honda website.
To unlock your Honda’s system, you will need two key pieces of information: your Honda’s Vehicle Identification Number (VIN) and the serial number of your radio or navigation device. Let’s break down how to find each one.
Locating Your Honda VIN
Your VIN is a 17-digit code unique to your vehicle. You can find it in several places:
- Driver’s Side Windshield: Look at the base of the windshield on the driver’s side.
- Vehicle Registration: Your VIN is printed on your vehicle registration documents.
- Insurance Documents: Check your insurance statement or proof-of-insurance card.
- Honda Financial Services Statement: Your VIN will be on any financial statements from Honda.
- Honda Correspondence: Look for your VIN on any surveys or official communications from American Honda Motor Co., Inc.
Important Note: Valid VINs use numbers 0-9 and letters A-Z, excluding I, O, and Q. Double-check for accuracy, ensuring numbers and letters aren’t transposed and that you haven’t mistaken the number 0 for the letter O.
Finding Your Device’s Serial Number
Finding your device’s serial number depends on your Honda model.
- 2013-2014 Odyssey or Pilot: These models don’t require unlock codes. Consult your owner’s manual for system initiation instructions.
- Pre-2001 Models: The serial number is on the back of the device. You’ll need to schedule a service appointment with your local Honda dealer.
- 2001 and Later Models: You can usually find the serial number on the device display or on a sticker in the glove compartment. Check your anti-theft ID card (often located in the glove box) or look for a sticker inside the glove box.
Obtaining the Serial Number from the Device Display (Most Models)
For most models 2001 and later, follow these steps if you cannot locate the serial number on a sticker:
- Turn your car’s ignition to the ON position.
- Turn ON the radio or navigation unit. If the display shows “COdE,” proceed to the next step. If not, remove the backup fuse for one minute and return to step 1.
- Turn OFF the device.
- Simultaneously press and hold the radio preset buttons 1 and 6, then turn the device ON.
- The display will alternate between two screens: one starting with “U” followed by the first four digits of the serial number (e.g., U2200), and the other starting with “L” followed by the last four digits (e.g., L0055). Record all eight digits, ignoring the “U” and “L.”
Obtaining the Serial Number for 2003-2007 Accord with Navigation
For these models, the process is slightly different:
- Turn the ignition to the ACC (I) position.
- Turn on the audio unit. If the display doesn’t show “COdE,” remove the backup fuse for a minute and restart from step 1.
- Turn off the audio unit.
- Press and hold the upper halves of the SEEK/SKIP and CH/DISC buttons while pressing and releasing the PWR/VOL knob. The display will alternate between two screens showing the first four and last four digits of the serial number, preceded by a “U” and “L,” respectively. Record all eight digits, disregarding the letters.
Retrieving Your Unlock Code Using https://radio-navicode.honda.com
Once you have your VIN and serial number, visit https://radio-navicode.honda.com to get your unlock code. Enter the required information in the “Get Codes” section. The website operates Monday-Friday 6 am to 11 pm CDT, Saturdays 6 am to 8:30 pm CDT, and Sundays 6 am to 11 pm CDT. You’ll need to provide your phone number, zip code, and email address for confirmation.
