If your 2009 Honda CRV radio displays “Enter Code,” you’ll need a five-digit code to unlock it. This situation usually arises after a battery disconnection or replacement. This guide provides a step-by-step approach to retrieving your Honda Crv 2009 Radio Code and getting your car stereo working again.
Locating Your Honda CRV’s VIN and Serial Number
The radio code is linked to your car’s unique Vehicle Identification Number (VIN) and the radio’s serial number.
Finding the VIN
Your VIN is a 17-character alphanumeric code:
- Driver’s Side Door Jamb: Check the sticker on the driver’s side doorjamb.
- Windshield Base: Look at the bottom corner of the windshield on the driver’s side.
- Vehicle Registration: Your car’s registration documents will also contain the VIN.
Finding the Radio Serial Number
You have two options for finding your radio’s serial number:
Option 1: Radio Display
-
Turn on the car and the radio. The “Enter Code” message should appear.
-
Turn the radio off.
-
Simultaneously press and hold preset buttons 1 and 6, then press the power button.
.avif)
- The serial number (e.g., S/N 12345678) will display.
%20(1).avif)
Option 2: Radio Sticker
-
If the display method fails, you can find the serial number on a sticker on the radio unit itself. This requires removing the radio from the dashboard, often using simple tools like a flathead screwdriver.
-
The 8-digit serial number is located on this sticker.
Generating and Entering Your Honda CRV 2009 Radio Code
Obtaining the Code
Several online services can generate your radio code using your VIN and serial number. Search for “Honda radio code” to find a reputable provider.
Entering the Code
-
Turn on your car and the radio.
-
Use the preset buttons (1-6) to enter the 5-digit code. Each button corresponds to a digit.
%20(1).avif)
.avif)
.avif)
- After entering all five digits, the radio should unlock and resume normal operation.
Troubleshooting
Incorrect Code: Double-check for typos when entering the code. Even one incorrect digit will prevent the radio from unlocking. If you’re sure about the code, the serial number might have been entered incorrectly during the code generation process.
Error E: Entering the wrong code too many times (usually 10) results in an “Error E” message. Disconnecting the battery for a few minutes and then reconnecting it can often reset this error.
