Activating your Tango Scorpio-LK key programmer requires a few steps. This guide provides a detailed walkthrough of the installation process, from system requirements to final setup.
System Requirements for Tango Scorpio-LK
Before starting, ensure your system meets the following requirements:
- Operating System: Windows XP (32-bit), Vista (32-bit), 7, 8, 10, and 11 (64-bit). Important: For Windows XP, Vista, and 7, all Microsoft Service Packs and Security Updates must be installed.
- Storage Space: 1GB of available storage space.
- Internet Connection: A stable internet connection is required for software and firmware updates.
Tango Scorpio-LK Installation Steps
Follow these steps to install and activate your Tango Scorpio-LK:
1. Download the Tango Setup File
Download the appropriate Tango setup file for your operating system:
- Windows 7, 8, 10, and 11: Download
- Windows XP and Vista: Download
2. Uninstall Previous Versions (If Applicable)
If you have a previous version of Tango installed, uninstall it before proceeding. The default installation path is usually "C:/Program Files/Scorpio-LK/Tango" or "C:/Program Files (x86)/Scorpio-LK/Tango". You can find the exact location by right-clicking the Tango desktop shortcut, selecting “Properties,” and then clicking “Open File Location.”
3. Run the Installer
Launch the downloaded installer (InstallOnline.exe or InstallOnlineXP.exe). Follow the on-screen instructions and prompts.
- Microsoft Visual C++ Libraries: The installer will prompt you to install the necessary Microsoft Visual C++ libraries. If already installed, choose “Repair” or “Reinstall.”
- USB Driver Installation: Ensure the Tango hardware is not connected to your PC. Click “OK” to install the USB driver. For Windows 7, 8, 10, and 11, connect the Tango hardware after this step. For Windows XP and Vista, the driver is pre-installed. Connect the Tango hardware after the installation and follow the Windows “Found new device” dialog to complete the driver installation.
4. Connect Tango to Your PC
Plug the Tango hardware into an available USB port on your computer.
5. Run Tango.exe and Update
Launch Tango.exe. The software will automatically check for updates and prompt you to download the latest version. Do not interrupt this process.
6. Firmware Update
After the software update, Tango.exe will automatically close and relaunch to initiate a firmware update. Do not interrupt this process. If the software doesn’t relaunch, ensure you installed the required Visual C++ libraries in Step 3.
7. Hardware Timer Update
Once the firmware update is complete, Tango.exe will relaunch again to update the built-in hardware timer.
8. Final Steps
After the timer reset, restart Tango.exe. To download any auxiliary files, go to Help -> Updates -> Check Updates. Your Tango Scorpio-LK is now activated and ready to use.
Conclusion
Activating your Tango Scorpio-LK is a straightforward process. By following these steps carefully, you can ensure a successful installation and begin utilizing its key programming capabilities. Remember to always keep your software and firmware updated for optimal performance.
